Manlift Genie Z34 - 2WD - ELECTRIC
-
Pricing
1 Day Minimum
-
$240 Minimum Rental
1 Day $240
-
1 Week 800
-
4 Week $1750
- .....................................
Another narrow base, zero tailswing boom!
- The all new Sep-Ex 48V DC (eight 6V batteries 315 Ah capacity) drive system allows maximum drive performance resulting in 35% gradeability and 4.0 mph travel speed.
- The Sep-Ex motor controller eliminates the need for forward/reverse contractors or speed sensors. This reduces complexity and improves the reliability of the drive system.
- The Sep-Ex drive motors and controller provide automatic hill braking and ramp braking.
- Ideal for confined work spaces-the Z-34/22N is only 58 in (1.47 m) wide and has zero tailswing.
- Rolls through standard double doorways. The Z-34/22N narrow boom works both indoors and out with emissionfree, noise-free electric drive.
- A standard 4 ft (1.22 m) jib boom with 139° range of motion operates above or below horizontal throughout the full boom range of motion.
- The combination of 40 ft 6 in (12.52 m) working height, 22 ft 3 in (6.8 m) outreach and up and over clearance of 15 ft 3 in (4.6 m) provides the most versatile range of motion in its class.
- 180° powered platform rotation allows easy operation and precise platform positioning.
- Compact storage length of 13 ft 9in (4.2 m) and width of 58 in (1.47 m).
- Dual parallelogram riser design allows ascent and descent along a vertical plane without retracting or extending the boom.
Standard Features
- 40 ft 6 in (12.52 m) working height
- 22 ft 3 in (6.78 m) horizontal reach
- Compact 58 in (1.47 m) width
- 500 lb (227 kg) lift capacity
- 48V DC power source
- Proportional drive and lift
- 180° platform rotation
- Articulating jib features 139° working range
- Drive enable system
- Self-leveling platform
- AC wiring to platform
- Non-marking tires
- Hour meter
Options and Accessories
- Alarm package
- Lift/drive select
- Platform swing gate
- Air line to platform
- Battery charge indicator
- LVI (low voltage interrupt) with BCI (battery charge indicator)
Standards Compliance
- ANSI/SIA A92.5
- CSA CAN3-B354.4
- CE compliance
- AS1418.10
- PB-10-611-03
The owner of this blog did not allow comments.