4"x24" Walk Behind Trencher

Pricing

3 HR Minimum    $109 Minimum Rental

1 Day $209  l  1 Week $836  l  4 Week $2097

...........................................................

At only 32" (813 mm) wide,this walk-behind compact trencher can go anywhere and dig in any type of dirt, thanks to the variety of digging chains it can run, including the patented, super-durable Shark Chain II trencher chain. And it doesn't mess around, with a digging chain speed of 276 fpm (84 m/min).

Key Features

• Unique, greasable bronze pivot bushing increases reliability
• Quiet, fuel-efficient Honda overhead-valve gasoline engine provides plenty of trenching power
• Accepts multiple sizes and types of trencher chains, from standard cup-tooth to maximum-strength Shark Chain II.

DIMENSIONS*    U.S.    METRIC
Trench depth, max.             30 in    760 mm
Angle of approach              35°   
Angle of departure              65°   
Trench width                       4.3 in - 6 in    110 mm - 150 mm
Boom travel, down              60°   
Boom travel, up                  47°   
Centerline trench to outside edge of machine, left    15 in    381 mm
Centerline trench to outside edge of machine, right    17 in    432 mm
Headshaft height, digging chain    8.6 in    220 mm
Transport height                            47 in    1.17 m
Transport length                            88 in    2.24 m
Wheelbase                                    32 in    813 mm
Spoils discharge reach                 10.6 in    270 mm
Width, transport                             32 in    813 mm
Tread                                             26 in    660 mm

OPERATION    U.S.    METRIC
Vehicle speeds    155 fpm    47 m/min
Digging chain speed    276 fpm    84 m/min
Spoils handling (single, open-end auger) auger-size       
    Outer diameter    12 in    305 mm
    Inner diameter    4 in    102 mm
    Length    9 in    229 mm
Trencher cleaner type    Mechanical   
Trencher cleaner size    4 in - 6 in    100 mm - 152 mm
Operating weight (based on roller boom and narrow-width digging chain)    900 lb    408 kg

POWER    U.S.    METRIC
Engine    Honda GX340   
Type        4-stroke, overhead valve   
Fuel         Gasoline   
Cooling medium    Air   
Number of cylinders    1   
Displacement    20.6 in3    337 cm3
Bore         3.2 in    82 mm
Stroke      2.5 in    64 mm
Manufacturer's power rating    11 hp    8.2 kW
Rated speed    3400 rpm   

POWER TRAIN
Ground drive transmission: Hydrostatic, infinitely variable from zero to maximum, gearbox to axle, speed and direction controlled with single lever
Pump drive clutch: Mechanical, hand-operated, spring-loaded with tension roller for belt drive
Digging chain clutch: Mechanical, hand-operated, spring-loaded with tension roller for belt drive
Trencher drive: Mechanical; belt drive to reduction drive, headshaft
Belt: 2-groove power band
Digging chain: 33,000-lb (15 000 kg) or 35,000-lb (15 875 kg) test
Chain drive sprocket: Forged and tempered
Spoils handling drive: Mechanical, attached to and rotates with headshaft

TIRES/PRESSURE    U.S.    METRIC
Drive, standard    16 x 6.50-8; 28 psi    193 kPa
Drive, optional    18 x 8.50-8; 22 psi    152 kPa
Trail    13 x 5.00-6; 20 psi    138 kPa

HYDRAULIC SYSTEM    U.S.    METRIC
Drive pump capacity @ 2500 rpm    9.8 gpm    37.1 L/min
Filtration    Return flow, 10 micron nominal   
Hydraulic drive motor       
Torque @ 1000 psi (69 bar) and 9.8 gpm (37 L/min)    643 in·lb    730 N·m
    Speed @ 1000 psi (69 bar) and 9.8 (37 L/min)    410 rpm   
    Displacement    5.4 in3/rev    88.5 cm3/rev
    Type    Bi-directional   

FLUID CAPACITIES    U.S.    METRIC
Fuel tank    1.7 gal    6.5 L
Engine oil    2.3 pt    1.1 L
Hydraulic reservoir    4.5 gal    17 L
Hydraulic system    5 gal    18.9 L
Axle oil    2.8 pt    1.3 L
Headshaft gearbox oil    2 pt    1 L